| Complete Security BVBA | Uw complete oplossing voor beveiliging |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oasis |
|
 |
 |
 |
Product overview  |
| The JK-82 basic kit | The JK-81 basic kit |
 consists of:
|
consists of:
|
 Manual in PDF format |
Manual in PDF format |
| The JA-82KRC control panel | |
 The JA-82KRC is a system built from three components: the JA 82K control panel (with 4 wired inputs), the JA 82R radio module (with 50 wireless inputs) and the JA 82C wired input extension module (with 10 additional wired inputs). The JA 82K main board provides building-block-like modularity which allows functional extensions to be made by simply plugging-in the required modules.
By assigning connected devices to the A, B or C sections the system can be configured for partial setting or it can be split for use by two independent neighbours.The control panel provides 2 programmable outputs. Code/card operation allows up to 50 codes/cards to be recognised. To connect a hard-wired keypad or a computer, the control panel is equipped with a digital bus provided by terminals and RJ connectors. The system is mains-powered and can be backed up by a battery with a capacity of 1.3 or 2.6 Ah. The event memory stores the last 255 events. The internal clock provides an automatic summer time offset. The JA 82R radio module makes it possible for up to 50 wireless devices to be enrolled (detectors, remote controls, keypads, sirens or thermostats). The PG outputs are not only available as physical control-panel terminals, but also as radio signals for the control of UC and AC receiver outputs. Using the JA 80K modularity, any of the JA 80X, JA 80Y or JA 80V communicators can be plugged in as optional modules. |
|
| Manual in PDF format User manual in PDF format |
|
| The JA-80F wireless keypad | The JA-80H outdoor keypad |
 operates and programs the system, has a built-in access card reader (RFID) and an input for a door sensor. Easy- to-understand system status information is provided in text form, for example: which window(s) is (are) opened, if the system is armed etc. Keypad texts can be edited.Can be enrolled to the control panel (several keypads can be used in the system) The JA-80E is a wired version of the keypad, and must be connected to the control panel with a cable. |
 has a built-in access card reader, a door bell button and its keys are illuminated. It usually controls door access but it can also be used to operate the control panel if required.Connects to the control panel with a cable via a WJ-80 interface The JA-80N is a version which only has a card reader, no keypad. |
| Manual in PDF format (JA-80E) Manual in PDF format (JA-80F) |
Manual in PDF format (JA-80H) Manual in PDF format (JA-80N) |
| The WJ-80 interface | The PC-01 access card |
 connects the JA-80H outdoor keypad (or JA-80N reader) to the control panel. It provides a relay output for an electrical door lock (or a gate actuator) and an input to open the door from the inside. It reports the door opening to the control panel the same way as a door detector does. Third-party keypads or readers can be connected to the WJ-80 if they use Wiegand 26b protocol.Connects to the control panel by a bus cable, its doorbell button transmitter can be enrolled to a JA-80L internal siren (JA-80H only) |
 is a proximity card (RFID standard EM UNIQUE 125kHz). Up to 50 cards can be used in the system. For higher security each card can be combined with a digital code (PIN). It is possible to print your artwork on the card (using some computer printers).The PC-02 is the key tag version of the card. It enrolls to the control panel via keypads: JA-80F, JA-80E, JA-80H or JA-80N |
| Manual in PDF format |
|
| The JA-80P motion detector | The JA-80PB combined detector |
 has a PIR sensor which covers up to 112m² of floor (an optional pet-immune lens can eliminate the effects of small animals). It uses digital signal processing to avoid false alarms. It also has an input to connect a door sensor.Can be enrolled to the control panel, to UC and AC receivers (to trigger relays) and to the JA-80L indoor siren (to indicate movement by making a sound) |
 combines a PIR motion sensor with a dual glass-break detector (breaking a window can be detected up to 9 meters away). It uses digital signal processing to avoid false alarms. It provides an input to connect a door sensor. This detector occupies two addresses in the control panel to distinguish between motion and glass breaking.Can be enrolled to the control panel, to UC and AC receivers (to trigger relays) and to the JA-80L indoor siren (to indicate movement by making a sound) |
| Manual in PDF format |
Manual in PDF format |
| The JA-84P motion detector with built-in camera | The JA-89P outdoor PIR detector |
 In addition to the PIR detection, the JA-84P provides visual alarm verification. When a movement is detected, a sequence of 4 photos is taken and then wirelessly transmitted to the control panel and subsequently to a server outside the protected premises. This requires the control panel to be equipped with the JA-80Q data processing module and with a suitable communicator. The system allows for multiple camera detector installations. |
 The JA-89P designed to detect intrusion in outdoor areas. It supplements a double-zone PIR sensor produced by Optex with a Jablotron transmitter enabling the sensor to be used within JA-80 OASiS systems. The detection range is adjustable from 2 to 12 meters. |
| Manual in PDF format |
Manual in PDF format |
| The JA-80M door detector | The JA-82M window detector |
 has a magnetic sensor which activates when a door or window is opened. It also provides an input to connect external sensors.Can be enrolled to the control panel, to UC and AC receivers (to trigger relays) and to the JA-80L indoor siren (to indicate movement by making a sound) |
 is an "invisible" magnetic sensor which can be easily installed on the majority of window frames. It is powered by 2 lithium cell button batteries model CR2354Can be enrolled to the control panel, to UC and AC receivers (to trigger relays) and to the JA-80L indoor siren (to indicate activation by making a sound) |
| Manual in PDF format |
Manual in PDF format |
| The JA-80S fire detector | The JA-80G gas leak detector |
 combines an optical smoke sensor and a temperature sensor. It has a built-in siren for local warning and a test button combined with an optical indicator.Can be enrolled to the control panel, to UC and AC receivers (to trigger relays) and to the JA-80L indoor siren (to indicate danger of fire by making sound) |
 is activated by combustive gases or fume leakages. It uses a hot platinum filament sensor. This detector is mains-powered (230V AC) and besides wireless signalling to the system, it also provides a relay output to shut down an electric gas inlet valve, if installed.Can be enrolled to the control panel, to UC and AC receivers (to trigger relays) and to the JA-80L indoor siren (to indicate activation by making a sound) |
| Manual in PDF format |
Manual in PDF format |
| The JA-85B glass-break detector | The JA-85P motion detector |
 detects a window breaking at a distance of up to 9 meters away. It uses digital signal processing to avoid false alarms. It can also be installed in a car interior.Can be enrolled to the control panel, to UC and AC receivers (to trigger relays), to the JA-80L indoor siren (to indicate activation by making a sound) and to CA-18xx car alarms. |
 is a small-size PIR sensor suitable for protecting small rooms or car interiors. It uses digital signal processing to avoid false alarms.Can be enrolled to the control panel, to UC and AC receivers (to trigger relays), to the JA-80L indoor siren (to indicate activation by making a sound) and to CA-18xx car alarms. |
| Manual in PDF format |
Manual in PDF format |
| The JA-80L indoor siren | The JA-80A outdoor siren |
 is a mains-powered (230V AC) siren which indicates an alarm, and exit/entrance delays. If disconnected from the power while it sounds an alarm, it reports tampering to the system (i.e. intruder verification). Can also be used as a doorbell and as acoustic indication of detector triggering. Its indicator function is programmable.The siren can be enrolled to the control panel and also wireless detectors, RC controllers, wireless keypad inputs and the JA-80H door bell button can be enrolled to it to generate the desired sound. |
 is a completely wire-free siren in a solid housing. It also serves as an external tamper detector. Its lithium battery lasts up to 3 or 5 years (depending on the mode).Can be enrolled to the control panel |
| Manual in PDF format |
Manual in PDF format |
| The RC-80 key fob | The RC-88 wall button |
 can operate the system or other appliances. Its button functions are programmable. Optional housings allow you to modify it to have 2 or 4 buttons.Can be enrolled to the control panel, AC and UC receivers (to activate relays), the JA-80L siren (bell function) and to CA-18xx car alarms |
 can be used to trigger a panic alarm or it can also be used to operate the control panel, wireless door bell or to control other appliances. Its button functions are programmable.Can be enrolled to the control panel, AC and UC receivers (to activate relays) and the JA-80L siren (bell function) |
| Manual in PDF format |
Manual in PDF format |
| The RC-89 doorbell (or panic) button | The RC-87 wireless wrist button |
 works as a wireless doorbell button together with a JA-80 siren but it can also be enrolled to the control panel as a panic button or to AC and UC receivers to operate their relays.Can be enrolled to the control panel, AC and UC receivers (to activate relays) and the JA-80L siren (bell function) |
 The RC-87 allows users to trigger panic alarms or to control appliances remotely. It is especially designed for personal calls for help. The battery-powered wireless button can be worn on your wrist like a watch or it can hung around your neck.The button can be enrolled to an OASiS control panel, to AC or UC receivers (for remote relay control) or to JA-80L sirens (for acoustic signalling). |
| Manual in PDF format |
Manual in PDF format |
| The RC-85 remote control module | The TP-80 and TP-82 room thermostats |
 when installed in a car allows you to operate the system or to activate different equipment (garage door opener, lights, door bell etc.). It can also be used to report an alarm from a car alarm. It is powered by 12V DC in the car.Can be enrolled to the control panel, AC and UC receivers (to activate relays) and the JA-80L siren (bell function) |
 can control heating wirelessly (via AC module relays). Besides keeping the desired temperature it can avoid freezing while the heating is off. Thermostats can also be enrolled to the control panel to report a freezing threat (heater failure) or fire danger. Thermostats also enable the remote control of heating by mobile phone or by the Internet (via the control panel communicator)Can be enrolled to AC receivers (to operate a relay - heater), to the control panel (to indicate freezing alarms, fire alarms and heating failures) |
| Manual in PDF format |
Manual in PDF format (TP-80) Manual in PDF format (TP-82) |
| The AC-83 receiver | The UC-82 and AC-82 receivers |
 The receiver has two power relays which can be operated wirelessly and another one for circulating pump control. The receiver is powered directly from the mains (230V AC). The receiver is designed to receive signals from TP-8x series wireless thermostats. The relay can enroll other wireless devices, which can change the heating mode from "heating to the desired temperature" to "anti-freeze temperature" (RC controllers, thermostats, programmable control panel outputs (PG) and magnetic detectors). |
 each have 2 relays that can be operated wirelessly on demand. The UC version is powered by 12V DC, and the AC version directly from the mains (230V AC).Each relay can enroll RC controllers, thermostats, programmable control panel outputs (PG), wireless detectors, inputs in wireless keypads and a JA-80H keypad doorbell button. |
| Manual in PDF format |
Manual in PDF format (UC-82) Manual in PDF format (AC-82) |
| The AC-8007/8014 multichanel receiver | The JA-80D universal transmitter |
 The AC 8007 is a 7-channel receiver of signals from TP 8x wireless thermostats or from JA-80 wireless detectors (JA 80M, JA 80S, JA 80D) and RC-8x remote controls working on a frequency of 868 MHz. It can also be used with TP 89 digital bus thermostats. The receiver has 7 outputs, which can be used to control various devices. LEDs on the receiver's front cover indicate the status of each output channel. When used with wireless thermostats, the receiver can efficiently control multi-zone heating or cooling systems. The AC 8000R built-in power relay module can be used as a pump control.The AC 8014 is a 14-channel version which is primarily designed for use with thermostats in heating water systems. It should not be used to control any relays, semiconductor switches etc. |
 Universal transmitter for transferring the state of detectors or other devices with an output connector (NC or NO) to the OASiS wireless system. Can be used for device failure reports via the control panel's communicator or to connect a detector with a NO output. The transmitter is powered by battery. |
| Manual in PDF format |
Manual in PDF format |
| The JA-80V LAN / telephone line communicator | The JA-80Y GSM/GPRS communicator |
 is a module that combines LAN and PSTN phone line communication. It allows remote access to the system by mobile phone or via the Internet. It can also report events in the system to mobile phones and to alarm receiving centres (monitoring).Can be installed inside the control panel case, connects to the control panel bus, telephone line and to a LAN (Ethernet) |
 is a module which uses the GSM mobile phone network. It allows remote access to the system by mobile phone or via the Internet. It can also report events from the system to mobile phones and to alarm receiving centres (monitoring). It also provides a simulated telephone line (GSM gateway feature).Can be installed inside the control panel case, connects to the control panel bus and needs a GSM provider's SIM card |
| Manual in PDF format |
Manual in PDF format |
| The JA-80X voice communicator | The SP-02 voice intercom |
 is a module which uses telephone lines to report alarms to up to 4 tel. numbers by voice report (up to 6 messages can be recorded). It allows remote control of the system by mobile phone. In the control panel it can be installed by itself or combined with a JA-80V or JA-80Y module.Can be installed inside the control panel case, connects to the control panel bus and to a telephone line (PSTN or simulated by the JA-80Y GSM communicator) |
 is a device which allows pre-authorized phones to call into the premises and listen in or talk. It also has a "push-and-talk" function (a programmed number is called after its button is pressed)Can be connected to a PSTN tel. line or to a tel. line simulated by a JA-80Y GSM communicator |
| Manual in PDF format |
Manual in PDF format |
| The JA-80T computer cable | The JA-80BT Bluetooth adapter |
 allows you to connect the control panel to a PC. An installer or end user can use it for supervision of the system using ComLink software.Connects the control panel bus to a PC's USB port |
 The JA-80BT interface allows you to establish a wireless connection between systems of the JA-8x series or the JA-6x series and PCs running ComLink software. This provides a convenient tool for system administration (for both installers and users). |
|
Manual in PDF format |
Manual in PDF format |
| The AN-80 and AN-81 external antennas | The BS-84 bus splitter |
 can be used with the control panel or with the UC-82 receiver. The AN-80 is designed to be installed in a plastic cable duct, the AN-81 is a rod antenna which can also be installed outdoors.Connects to the control panel or UC receiver antenna connector |
 splits the control panel bus and provides three RJ connectors (size 4/4)Connects to the control panel's flat bus cable with RJ connectors |
| Manual in PDF format (AN-80) Manual in PDF format (AN-81) |
|
| The ST-01 telephone line simulator (Service tool - 01) | |
 The ST-01 is designed as a telephone line simulator for the JA-80X communicator. Using this tool makes it possible to record voice messages on the JA-80X using a common DTMF telephone without a telephone line. The main advantage of this simulator is the quality of the recorded voice message, which is not worsened by the influence of telephone lines and GSM RF interference.Another advantage is that no other telephone line or mobile phone is necessary for recording voice messages. |
|
|
Manual in PDF format |
|
| Batteries used in the system | |
 The following batteries are used in the system. Their lifetime for common use of the system is calculated to be about 3 years (unless otherwise specified):
|
|
| Specifications |
|